| Concrete Adhesives | |
|---|---|
Unicare® Concrete AdhesiveUnicare Concrete Adhesive is used to bond concrete products. Ideal for constructing walls, fastening step veneers, installing coping and more. Color
Packaging
|
|
| Cleaners | |
Unicare® Oil and Dirt RemoverThe most effective product available for removing oil spots from paving stones and concrete. Dissolves, dislodges, and encapsulates oil, to ensure thorough cleaning without leaving any oily film after rinsing. Packaging
|
Unicare® Efflorescence RemoverSpecially formulated to dissolve efflorescence (whitish salt deposit) and remove ground-in dirt on paving stones and concrete, without discoloring or damaging surfaces. It cleans evenly, and enables the sealant to better penetrate the material to be treated. Packaging
|
| Sands & Gravels1 | |
Unicare® Polymeric Sand PlusTA special mix of graded sand and binder specifically formulated for achieving optimum lock-up of pavers or slabs by filling the joints between them. Unlike regular sweeping jointing sand, Polymeric Sand resists insect penetration, weed growth, and erosion. For standard joints. Color
Packaging
Coverage
|
Unicare® Polymeric Sand MaxHigh-performance mix made of the latest-generation of polymers is specially formulated for the filling of paver or slab joints in heavy traffic areas such as pool decks, sloped driveways, public ways, etc. Maximum width: 1" (2.5 cm). Minimum depth: 1.25" (3 cm). Color
Packaging
Coverage
|
| Sealers | |
Unicare® Solvent-based Protective SealerA solvent-based thermoplastic acrylic protective sealant for paving stones. It is the best protection you can buy for your pavers; it enhances the original color of the units with a high gloss sheen. Packaging
|
Unicare® Joint Sand Stabilizing SealerA one-step sealer and joint sand stabilizer recommended for residential, commercial, and industrial projects. It will protect the colors and revitalize the pavers by enhancing the colors without darkening the pavement. It will water proof the surface to inhibit absorption of food, beverages, salt, and acid staining, thereby reducing the cost of maintenance. This bond will resist joint erosion and weed growth. Packaging
|
| Solar Lighting | |
NighTec®Night-lighting concrete blocks easily illuminate dark, hazardous areas or add an attractive accent to any landscape. The effect of noctilucent lighting is that of "phosphorescence". With phosphorescence, the luminescent materials charge themselves in UV- or black light and then illuminate in the dark. This effect is often called "glow in the dark". Dimensions: 10cm x 10cm x 8cm Features
Color
|
SolarCap™ lights by Skyfuel®SolarCap™ lights can be installed anywhere. Installation itself is very easy. Different from 12V low voltage and 110V or 120V lighting which requires wiring, conduit, beakers, switches, timers and a monthly electricity charge. When it is installed in a sidewalk, patio, fountain, stairway, boardwalk, pool deck, building exterior, driveway, or garden path, it not only beautifies the landscape but also safely acts as a guide for pedestrian or vehicular traffic. 2" (5cm) Diameter x 1.25" (3cm) High Features
Color
|
|
Easy ProUltimate Paving Stone Joint Compound designed for installation in light rain or sun with a surface temperature above 32F, this pre-mixed epoxy resin product is ideal for residential driveways, patios, pool decks and walkways. It is also permeable. Features:
Colors:
Coverage:
STORAGE: Open product good for 30 day when covered with water.
Note: This product is not suitable for use with Il Campo®, Series 3000®, and Unigranite®.
Available only in Chicago, IL and East Coast
|
Drain PlusDesigned for installation in light rain or sun with a surface temperature above 32F, this epoxy resin product is ideal for residential driveways, patios, pool decks and walkways.
Features:
Colors:
Coverage:
Note: This product is not suitable for use with Il Campo®, Series 3000®, and Unigranite®.
Available only in Chicago, IL and East Coast
|
.jpg)
1Do not use Unicare Polymeric Sand with Umbriano and Belpasso
Extra care must be exercised when using Unicare Plus Polymeric Sand on Courtstone®, Copthorne®, and Richcliff®, Series 3000®, Il Campo®, and Unigranite®.
Pavers and slabs with textured surfaces will require additional sweeping and blowing to completely remove the Polymeric Sand from the surface.
IMPORTANT: Always compact the paver surface once first BEFORE sweeping any Polymeric Sand into the joints. Always use a compactor with a protective membrane attached to the bottom of the plate.
NOTICE: Unicare Polymeric Sand, cleaners and sealers, must always be applied by a trained and experienced professional. Contact your local Unilock office for training and the most up-to-date best practices. Unilock does not accept any responsibility for damage to the surface caused by the improper application and use of Unilock Polymeric Sand, sealers or cleaners.
